Design and Use of Relational Databases in Chemistry

Product Description
Design and Use of Relational Databases in Chemistry helps programmers and users improve their ability to search and manipulate chemical structures and information, especially when using chemical database “cartridges”. It illustrates how the organizational, data integrity, and extensibility properties of relational databases are best utilized when working with chemical information.

The author facilitates an understanding of existing relational database schemas and shows how to design new schemas that contain tables of data and chemical structures. By using database extension cartridges, he provides methods to properly store and search chemical structures. He explains how to download and install a fully functioning database using free, open-source chemical extension cartridges within PostgreSQL. The author also discusses how to access a database on a computer network using both new and existing applications.

Through examples of good database design, this book shows you that relational databases are the best way to store, search, and operate on chemical information.

About the Author
President, gNova Inc., San Diego, California, USA
Product Details

* Hardcover: 226 pages
* Publisher: CRC; 1 edition (December 5, 2008)
* Language: English
* ISBN-10: 1420064428
* ISBN-13: 978-1420064421

http://rapidshare.com/files/174257309/1420064428_-_Relational_Databases_in_Chemistry.rar

ebook Digital Systems Design Using VHDL

Cengage-Engineering | 1998-01-14 | ISBN: 053495099X | 470 pages | PDF | 5,2 MB

Written for an advanced-level course in digital systems design, DIGITAL SYSTEMS DESIGN USING VHDL integrates the use of the industry-standard hardware description language VHDL into the digital design process. Following a review of basic concepts of logic design in Chapter 1, the author introduces the basics of VHDL in Chapter 2, and then incorporates more coverage of VHDL topics as needed, with advanced topics covered in Chapter 8. Rather than simply teach VHDL as a programming language, this book emphasizes the practical use of VHDL in the digital design process. For example, in Chapter 9, the author develops VHDL models for a RAM memory and a microprocessor bus interface; he then uses a VHDL simulation to verify that timing specifications for the interface between the memory and microprocessor bus are satisfied. The book also covers the use of CAD tools to synthesize digital logic from a VHDL description (in Chapter 8), and stresses the use of programmable logic devices, including programmable gate arrays. Chapter 10 introduces methods for testing digital systems including boundary scan and a built-in self-test.

Download:

http://depositfiles.com/files/edfin5shw

http://w15.easy-share.com/1702329859.html

ebook Digital Systems Design with VHDL and Synthesis: An Integrated Approach

Wiley-IEEE Computer Society Pr | 1999-04-27 | ISBN: 0769500234 | 516 pages | PDF | 6,1 MB

K.C. Chang presents an integrated approach to digital design principles, processes, and implementations to help the reader design increasingly complex systems within shorter design cycles. Chang introduces digital design concepts, VHDL coding, VHDL simulation, synthesis commands, and strategies together.
Digital Systems Design with VHDL and Synthesis focuses on the ultimate product of the design cycle: the implementation of a digital design. Many of the design techniques and considerations illustrated in the text are examples of actual real-world designs.
Unique features of the book include the following:
VHDL code explained line by line to capture the logic behind the design concepts
Simulation waveforms, synthesized schematics, and results are shown, verified, and analyzed
VHDL code is synthesized and commands and strategies are discussed
Variations on the design techniques and common mistakes are addressed
Demonstrated standard cell, gate array, and FPGA three design processes, each with a complete design case study
Test bench, post-layout verification, and test vector generation processes are illustrated

Download:

http://depositfiles.com/files/edfin5shw

http://w15.easy-share.com/1702329859.html

System-On-A-Chip Design and Test

Starting with a basic overview of system-on-a-chip (SoC), including definitions of related terms, this book helps you understand SoC design challenges, and the latest design and test methodologies. You see how ASIC technology evolved to an embedded cores-based concept that includes pre-designed, reusable Intellectual Property (IP) cores that act as microprocessors, data storage devices, DSP, bus control, and interfaces -- all ?stitched? together by a User?s Defined Logic (UDL). Part One features a discussion of SoC-related design difficulties including hardware-software co-design, reuse design, and cores design. You get practical, real-world design guidance referencing actual product specifications, delivery requirements, and system integration requirements in use by commercial enterprises and under evaluation by the SoC community. Part One concludes with the information you need to develop test benches at both the cores and SoC level. Part Two contains a review of the challenges you face in testing SoC and test methodologies for overcoming these hurdles. Test methods for embedded logic cores, microprocessor cores, micro-controller cores and large memory blocks are included, as well as methods for testing embedded analog and mixed-signal circuits, and Iddq testing on SoC. You also get an overview of material handling, speed-binning, and production flow to apply your knowledge to actual production processes.

Download:

http://rapidshare.com/files/6426588/1580531075.zip

Design of Construction Structure.pdf

These pdf files so much applies to various engineering disciplines, mechanical engineering, structural, civil engineering and more. Here you can learn about strength of materials, beams, concretes, constructions all are presented with examples, huge tasks exercises, and conclusions. Each pdf file covers one construction structure lesson!

Table of contents as well as download links:

• Module 1 Objectives and Methods of Analysis and Design, and Properties of Concrete and Steel
  • Lesson 1 Objectives and Methods of Analysis and Design [ Objectives of the Design of Reinforced Concrete Structures ~ Method of Design ~ Analysis of Structures ~ Design Loads ~ Loads and Forces ]
  • Lesson 2 Properties of Concrete and Steel [ Properties of Concrete ~ Workability and Durability of Concrete ~ Properties of Steel ~ Other Important Factors ~ Concluding Remarks ]
• Module 2 Philosophies of Design by Limit State Method
  • Lesson 3 Philosophies of Design by Limit State Method [ Limit State Method ~ Analysis ~ Concluding Remarks ]
• Module 3 Limit State of Collapse - Flexure (Theories and Examples)
  • Lesson 4 Computation of Parameters of Governing Equations [ Singly Reinforce Rectangular Beams ~ Equations of Equilibrium ~ Computations of C and T ]
  • Lesson 5 Determination of Neutral Axis Depth and Computation of Moment of Resistance [ Computation of the Depth of Neutral Axis xu ~ Limiting Value of xu (= xu, max) ~ Values of dx,umax and pt, lim ~ Computation of Mu ~ Computation of Limiting Moment of Resistance Factor ]
  • Lesson 6 Numerical Problems on Singly Reinforced Rectangular Beams [ Types of Problems ~ Design Type of Problem ~ Design Problem 3.1 ~ Solution by Direct Computation Method ~ Use of Design Aids ~ Solution by using Design Aids Charts (SP-16) ~ Solution by using Design Aids Tables (SP-16) ~ Comparison of Results of Three Methods ~ Other Alternatives using Charts and Tables of SP-16 ]
  • Lesson 7 Numerical Problems on Singly Reinforced Rectangular Beams (Continued) [ Solution by Direct Computation Method - Problem 3.2 ~ Solution by Direct Computation Method - Problem 3.3 ~ Solution by Design Chart - Problems 3.2 and 3.3 ~ Solution by Design Tables - Problems 3.2 and 3.3 ~ Comparison of Results of Three Methods ]
• Module 4 Doubly Reinforced Beams - Theory and Problems
  • Lesson 8 Doubly Reinforced Beams - Theory [ Assumptions ~ Basic Principle ~ Determination of fsc and fcc ~ Minimum and maximum steel ~ Types of problems and steps of solution ]
  • Lesson 9 Doubly Reinforced Beams - Theory [ Numerical problems ]
• Module 5 Flanged Beams - Theory and Numerical Problems
  • Lesson 10 Flanged Beams - Theory [ Effective Width ~ Four Different Cases ~ Governing Equations ]
  • Lesson 11 Flanged Beams - Numerical Problems [ Analysis Type of Problems ~ Numerical Problems (Analysis Type) ~ Summary of Results of Examples 1-4 ~ Use of SP-16 for the Analysis Type of Problems ]
  • Lesson 12 Flanged Beams - Numerical Problems (Continued) [ Design Type of Problems ~ Numerical Problems ]
• Module 6 Shear, Bond, Anchorage, Development Length and Torsion
  • Lesson 13 Limit State of Collapse in Shear [ Failure Modes due to Shear ~ Shear Stress ~ Design Shear Strength of Reinforced Concrete ~ Critical Section for Shear ~ Enhanced Shear Strength of Sections Close to Supports (cl. 40.5 of IS 456) ~ Minimum Shear Reinforcement (cls. 40.3, 26.5.1.5 and 26.5.1.6 of IS 456) ~ Design of Shear Reinforcement (cl. 40.4 of IS 456) ~ Shear Reinforcement for Sections Close to Supports ~ Curtailment of Tension Reinforcement in Flexural Members (cl. 26.2.3.2 of IS 456) ~ Placement of Stirrups ]
  • Lesson 14 Limit State of Collapse in Shear - Numerical Problems [ Numerical Problems ]
  • Lesson 15 Bond, Anchorage, Development Length and Splicing [ Design Bond Stress Ï„bd ~ Development Length ~ Checking of Development Lengths of Bars in Tension ~ Derivation of the Limiting Ld (Eq. 6.13) ~ Anchoring Reinforcing Bars ~ Bearing Stresses at Bends (cl. 26.2.2.5 of IS 456) ~ Change in Direction of Reinforcement (cl. 26.2.2.6 of IS 456) ~ Reinforcement Splicing (cl. 26.2.5 of IS 456) ~ Numerical Problems ]
  • Lesson 16 Torsion in Beams - Limit State of Collapse [ Torsion in Reinforced Concrete Members ~ Analysis for Torsional Moment in a Member ~ Approach of Design for Combined Bending, Shear and Torsion as per IS 456 ~ Critical Section (cl. 41.2 of IS 456) ~ Reinforcement in Members subjected to Torsion ~ Requirements of Reinforcement ]
• Module 7 Limit State of Serviceability
  • Lesson 17 Limit State of Serviceability [ Short- and Long-term Deflections ~ Control of Deflection ~ Selection of Preliminary Dimensions ~ Calculation of Short-Term Deflection ~ Deflection due to Shrinkage ~ Deflection Due to Creep ]
• Module 8 Reinforced Concrete Slabs
  • Lesson 18 One-way Slabs [ One-way and Two-way Slabs ~ Design Shear Strength of Concrete in Slabs ~ Structural Analysis ~ Design Considerations ~ Design of One-way Slabs ~ Detailing of Reinforcement ]
  • Lesson 19 Two-way Slabs [ Two-way Slabs ~ Design Shear Strength of Concrete ~ Structural Analysis ~ Design Considerations ~ Design of Two-way Slabs ~ Detailing of Reinforcement ~ Numerical Problems ]
• Module 9 Staircases
  • Lesson 20 Types and Design of Staircases [ Types of Staircases ~ A Typical Flight ~ General Guidelines ~ Structural Systems ~ Effective Span of Stairs ~ Distribution of Loadings on Stairs ~ Structural Analysis ~ Illustrative Examples ]
• Module 10 Compression Members
  • Lesson 21 Definitions, Classifications, Guidelines and Assumptions [ Definitions ~ Classification of Columns Based on Types of Reinforcement ~ Classification of Columns Based on Loadings ~ Classification of Columns Based on Slenderness Ratios ~ Braced and unbraced columns ~ Longitudinal Reinforcement ~ Transverse Reinforcement ~ Pitch and Diameter of Lateral Ties ~ Helical Reinforcement ~ Assumptions in the Design of Compression Members by Limit State of Collapse ~ Minimum Eccentricity ]
  • Lesson 22 Short Axially Loaded Compression Members [ Further Assumptions Regarding the Strengths of Concrete and Steel ~ Governing Equation for Short Axially Loaded Tied Columns ~ Governing Equation of Short Axially Loaded Columns with Helical Ties ~ Illustrative Examples ]
  • Lesson 23 Short Compression Members under Axial Load with Uniaxial Bending [ Behaviour of Short Columns under Axial Load and Uniaxial Moment ~ Modes of Failure of Columns ~ Compressive Stress Block of Concrete when the Neutral Axis Lies Outside the Section ~ Determination of Compressive Stress Anywhere in the Section when the Neutral Axis Lies outside the Section ~ Compressive Stress Block of Concrete when the Neutral Axis is within the Section ~ Determination of Compressive Stress Anywhere in the Compressive Zone when the Neutral Axis is within the Section ~ Tensile and Compressive Stresses of Longitudinal Steel ]
  • Lesson 24 Preparation of Design Charts [ Design Parameters ~ Non-dimensional Equation of Equilibrium when k = , (Pure Axial Load) ~ Non-dimensional Equations of Equilibrium when Neutral Axis is Outside the Section (∞ > kD ≥ D) ~ Non-dimensional Equations of Equilibrium when the Neutral Axis is within the Section (kD <>
  • Lesson 25 Design of Short Columns under Axial Load with Uniaxial Bending [ Design Charts of SP-16 ~ Approximations and Limitations of Design Charts of SP-16 ~ Use of Design Charts in the Analysis Type of Problems ]
  • Lesson 26 Short Compression Members under Axial Load with Biaxial Bending [ Biaxial Bending ~ Interaction Surface ~ Limitation of Interaction Surface ~ IS Code Method for Design of Columns under Axial Load and Biaxial Bending ~ Solution of Problems using IS Code Method ]
  • Lesson 27 Slender Columns [ Concentrically Loaded Columns ~ Slender Columns under Axial Load and Uniaxial Moment ~ Effective Length of Columns ~ Determination of Sway or No Sway Column ~ Design of Slender Columns ~ Additional Moment Method ~ Illustrative Example ]
• Module 11 Foundations - Theory and Design
  • Lesson 28 Foundations - Theory [ Types of Foundation Structures ~ Safe Bearing Capacity of Soil ~ Depth of Foundation ~ Design Considerations ~ Distribution of Base Pressure ]
  • Lesson 29 Design of Foundations [ Numerical Problems ~ Practice Questions and Problems with Answers ]
• Module 12 Yield Line Analysis for Slabs
  • Lesson 30 Basic Principles, Theory and One-way Slabs [ Yield Line Theory ~ Assumptions ~ Rules for Yield Lines ~ Upper and Lower Bound Theorems ~ Methods of Analysis ~ Analysis of One-Way Slab ]
  • Lesson 31 Nodal Forces and Two-way Slabs [ Work Done by Yield Line Moments ~ Special Conditions at Edges and Corners ~ Two-way Slabs of Yield Pattern ]
  • Lesson 32 Two-way Rectangular, Square, Triangular and Circular Slabs [ Rectangular Slabs Simply Supported at Three Edges and Free at the Other Edge Considering Yield Pattern 1 ~ Rectangular Slabs Simply Supported at Three Edges and Free at the Other Edge Considering Yield Pattern 2 ~ Special Cases for Predicting Yield Patterns ~ Square Slabs with Forking Yield Pattern ~ Yield Lines of Fan Pattern ]
  • Lesson 33 Numerical Examples
• Module 13 Working Stress Method
  • Lesson 34 Rectangular Beams under Flexure [ Permissible Stresses in Concrete ~ Permissible Stresses in Steel Reinforcement ~ Permissible Shear Stress in Concrete Ï„c ~ Increase in Permissible Stresses ~ Assumptions for Design of Members by Working Stress Method ~ Modular Ratio m ~ Flexural Members - Singly Reinforced Sections ~ Balanced Section - Singly-Reinforced ~ Under-reinforced Section — Singly Reinforced ~ Doubly-Reinforced Beams ]
  • Lesson 35 Numerical Problems [ Numerical Problems ]
• Module 14 Tension Members
  • Lesson 36 Structural Requirements, Code Stipulations and Governing Equations [ Resistance to Cracking and Strength ~ IS Code Stipulations ~ Types of Tension Structures ~ Members Subjected to Axial Tension only ~ Members Subjected to Pure Flexure ~ Members Subjected to Combined Axial Tension and Moment. ]
  • Lesson 37 Numerical Problems
• Module 15 Redistribution of Moments
  • Lesson 38 Redistribution of Moments - Theory and Numerical Problems [ Two Span Beam ~ Recommendations of IS 456 ~ Explanations of the Conditions Stipulated in IS Code ]
• Module 16 Earthquake Resistant Design of Structures
  • Lesson 39 Seismic Effects, Material Behaviour and General Principles of Earthquake Resistant Design of Structures [ Direct and Indirect Seismic Effects ~ Behaviour of Concrete and Steel with High Intensity Repeated Axial Cyclic Loads. ~ Terminology for Earthquake Engineering ~ Bureau of Indian Standards for Earthquake Design ~ General Principles of Earthquake Resistant Design of Structures ~ Design Lateral Forces ~ Static Elastic Design ~ Dynamic Analysis ~ Objectives of Earthquake Resistant Design of Structures ~ Ductility and Ductile Detailing of Reinforcement ~ Practice Questions and Problems with Answers ]
  • Lesson 40 Ductile Design and Detailing of Earthquake Resistant Structures [ Displacement Ductility ~ Curvature Ductility ~ Rotational Ductility ~ Advantages of Ductility ~ Expressions of Ductility of Reinforced Concrete Rectangular Beams ~ Factors Influencing Ductility ~ Design for Ductility ~ Design for Shear in Flexural Members ~ Column and Frame Members Subjected to Bending and Axial Load ~ Special Confining Reinforcement ]

Analog Design Centering and Sizing eBook

Springer | 2007-07-11 | ISBN: 1402060033 | 195 pages | PDF | 4,1 MB

This book represents a compendium of fundamental problem formulations of analog design centering and sizing. It provides a differentiated knowledge about the tasks of analog design centering and sizing. In particular the worst-case problem will be formulated. It stands at the interface between process technology and design technology.
This book wants to point out that and how both process and design technology are required for its solution. The intention is to enable analog and mixed-signal designers to assess CAD solution methods that are presented to them. On the other side, the intention is to enable developers of analog CAD tools to formulate and develop solution approaches for analog design centering and sizing.
The structure of the book is geared towards a combination of a reference book and a textbook. The formulations of tasks and solution approaches by mathematical means makes the book suitable as well for students dealing with analog design and design methodology.

Download:

http://depositfiles.com/files/5906284

eBook-The Design of CMOS Radio-Frequency Integrated Circuits, Second Edition

Cambridge University Press | 816 pages | 2003-12-22 | ISBN: 0521835399 | 12.9MB

This expanded and thoroughly revised edition of Thomas H. Lee's acclaimed guide to the design of gigahertz RF integrated circuits features a completely new chapter on the principles of wireless systems. The chapters on low-noise amplifiers, oscillators and phase noise have been significantly expanded as well. The chapter on architectures now contains several examples of complete chip designs that bring together all the various theoretical and practical elements involved in producing a prototype chip. First Edition Hb (1998): 0-521-63061-4 First Edition Pb (1998); 0-521-63922-0

01 A nonlinear history of radio
02 Overview of wireless principles
03 Characteristics of passive IC components
04 A review of MOS device physics
05 Passive RLC networks
06 Distributed systems
07 The Smith chart and S-parameters
08 Bandwidth estimation techniques
09 High-frequency amplifier design
10 Voltage references and biasing
11 Noise
12 Low-noise amplifier design
13 Mixers
14 Radio-frequency power amplifiers
15 Feedback systems
16 Phase-locked loops
17 Oscillators and synthesizers
18 Phase noise
19 Architectures
20 Radio-frequency circuits through the ages

Download:

http://rapidshare.com/files/125908700/cambridge_-_the_design_of_cmos_rf_integrated_circuits.rar

eBook Radar Systems Analysis and Design Using With Matlab

Book Description

Written for researchers and engineers working in the field, Radar Systems Analysis and Design Using MATLAB provides fundamental radar principles, advanced topics, and rigorous but easy-to-follow mathematical derivations.

Product Details

Hardcover: 552 pages
Publisher: Chapman & Hall/CRC; 1 edition (June 2, 2000)
Language: English
ISBN-10: 1584881828
ISBN-13: 978-1584881827

Link Download:

Click Here (Mihd.net)

Machine Design Databook

SBN: 0071367071
Title: Machine Design Databook
Author: K. Lingaiah
Publisher: McGraw-Hill Professional
Publication Date: 2002-11-13
Number Of Pages: 1344

Table of Contents

Preface
Acknowledgments
1 Properties of Engineering Materials 1.1
2 Static Stresses in Machine Elements 2.1
3 Dynamic Stresses in Machine Elements 3.1
4 Stress Concentration and Stress Intensity in Machine Members 4.1
5 Design of Machine Elements for Strength 5.1
6 Cams 6.1
7 Pipes, Tubes, and Cylinders 7.1
8 Design of Pressure Vessels, Plates, and Shells 8.1
9 Design of Power Boilers 9.1
10 Rotating Disks and Cylinders 10.1
11 Metal Fits, Tolerances, and Surface Texture 11.1
12 Design of Welded Joints 12.1
13 Riveted Joints 13.1
14 Design of Shafts 14.1
15 Flywheels 15.1
16 Packings and Seals 16.1
17 Keys, Pins, Cotters, and Joints 17.1
18 Threaded Fasteners and Screws for Power Transmission 18.1
19 Couplings, Clutches, and Brakes 19.1
20 Springs 20.1
21 Flexible Machine Elements 21.1
22 Mechanical Vibrations 22.1
23 Gears 23.1
24 Design of Bearings and Tribology 24.1
25 Miscellaneous Machine Elements 25.1
Appendix A Measurement Units and Conversion Tables 1
Appendix B The Greek Alphabet 1
Appendix C References 1
Index 1

http://rapidshare.com/files/9991648/mdd_070103.rar

Free Download - Electrical Electronics, signal,design, ebook, dictionary pdfs

Electrical engineering dictionary
http://www.filestube.com/6a51a66a2bf71fb803e9/go.html

Standard handbook for electrical engineer
http://www.filestube.com/1da4e4ac5a64a1a303e9/go.html

Electrical and electronics principles and technology
http://www.filestube.com/eda686f24ecedfeb03e9/go.html

Principles and applications of electrical engineering
http://www.filestube.com/c01047f178b96d8103ea/go.html

Electrical power system quality 2nd editions
http://www.filestube.com/aaf7cdf9c3ec55d003e9/go.html

Electrical circuit theory and technology
http://www.filestube.com/026d6d488b5854d203e9/go.html

Fast analytical techniques electrical electronics circuits
http://www.filestube.com/d804b3d3894e7ff103e9/go.html

Handbook of electrical design details second edition
http://www.filestube.com/4b1e2d8c62dee1a003ea/go.html

ELectrical instulation for rotating machine
http://www.filestube.com/ac1ed3cca285f73003e9/go.html

Electrical and electronics principles and technology
http://www.filestube.com/22b676c00e3a3e3b03e9/go.html

Electrical contacts fundamentals applications and technology
http://www.filestube.com/36dc2f96ca9ecddc03e9/go.html

Setting fires with electrical timers
http://www.filestube.com/90b208ac89e548ec03e9/go.html

Electrical engineers portable handbook
http://www.filestube.com/f8e0bc88b393259003e9/go.html

Download Rapidshare Book Combinatorics of Experimental Design

Combinatorics of Experimental Design
414 pages | Djvu | 8 Mb

This book describes direct and recursive methods for the construction of combinatorial designs. It is ideally suited to the statistician through its discussion of how the designs currently used in experimental work have been obtained and through its coverage of other known and potentially useful designs.

It is equally suited to the needs of the combinatorialist, with its stress on the statistical motivation for studying particular finite structures and its suggestions of open problems in the construction of new designs with useful properties for the experimentalist. Designs are discussed within a unified framework, showing the interplay between elegant structure and practical use.

http://rapidshare.com/files/47863781/Ss.djvu.html

http://mihd.net/bufesc